| The Weld Mount System is a unique line of fasteners designed to be adhesively bonded to almost any substrate. The full system offers wire tie mounts, hose and cable clamps, studs, standoffs, and floating nutplates. The fasteners are mounted with unique non-sag acrylic adhesives which hold the parts in place on a vertical or overhead surface providing a permanent high strength bond. The adhesives are rated from -65 to 250 degrees and set in 15 minutes or less.
The Weld Mount System parts eliminate the need to drill into composites core which compromise your hull and deck. The adhesively bonded fasteners eliminate the need to drill and tap when used on metal surfaces. Weld Mount fasteners are great for mounting electronices, wire runs, bilge applications and firewall wiring. Weld Mount System fasteners save both time and money, it's easy to use, it eliminates drilling and they are much stronger than traditional methods. Tensile and Impact Strength typically exceed 200lbs/sq in when correctly applied using Weld Mount Adhesives
This Product Kit provides an introduction to the Weld Mount System and is suitable for installation of 25 Wire Ties and Mounts. The adhesive in the kit will cures in 12 minutes, and achieves working strength in 40 minutes
Try it today and you will never drill and compromise you hull again
The 1050 Kit contains:
1 AT-1030 Adhesive
25 AT-5 White Nylon Wire Tie Mounts
2 AT-550 Mixing Sticks
Full Step By Step Instructions |
